Custom Unicycles

I offer professional grade unicycles. They are built from high-quality U.S. or European cro-moly alloys. These cro-moly tubes are not raw, untreated soft alloys like the imported frames and unicycles from Taiwan and China.  My frames are handcrafted, either TIG-welded, bronze-fillet, or silver-brazed and precisely aligned, sized and built to order for the rider. My goal is to provide an alternative to the low-quality unicycles that the unicycling community has come to accept as the standard. However, my goal is not to provide a cheap unicycle and pretend it is a high-quality unit. My goal is to provide a source of unicycles and unicycle parts that are on par with the quality of Campagnolo and top-end Shimano. I have no interest in the products coming from Taiwan and China. But, I will use the best of those until I can produce a better product myself, made in the U.S.

I build all my current uni frames from high quality steel tubing from Columbus, Reynolds, Dedacciai, True Temper and U.S. made aircraft cro-moly. I am currently building prototype frames from KVA and Reynolds 953 martensitic stainless steel tubing. The characteristics and strengths of these stainless alloys greatly exceed those of titanium, the alloy they were designed to replace, due to the failings of titanium in high-stress applications.

I will be testing import frames and mine in the future as I set up some fixtures to check the strength and stiffness so I can provide concrete examples of how weak are the material and construction of cheap imports.

Frames are built to use 1″ 25.4 seat posts for 27.2 I use a special butted seat tube to fit 27.2 seat posts. Optionally, I can build them for the older 7/8 seat or provide a shim sleeve to reduce 1″ to 7/8″ or build to fit any other size if requested. Each frame is built with a long seat tube sized for the specific rider. This protects the weaker aluminum alloy seat post from bending and breaking from the seat hitting the ground during workouts and practices. The seat tubes are sized for the individual rider. When ordering I need one specific measurement top of seat to center of crank (hub axle). For giraffes I need axle to center crank and center crank to top of saddle.

All of my non giraffe frames are built to accommodate my new cast bearing holder. They are cast from 17-4 stainless steel made in 100% Minnesota. These utilize a precision press-fit bearing, not the inferior two-piece clamping type that crush and distort bearings. These are designed for efficiency and preformance, not the convience of being easy or cheaper.  These can be retro-fitted onto my older frames and Miyata frames. These holders are sold to fit either 40mm or 42mm bearings. They can be bored to a larger fit if needed.  A second version of the bearing mount allows for the mounting of extra legs to mount a second or multiple wheel package. The robustness of the holder can support the weight of a few adults without failing. I do not build unicycles that utilize the two bolt pinch type bearing holder. That is a inferior cheaper method of mounting a wheel to a unicycle.

I build the following models of unicycles (prices are for frame only and are subject to change): I can also build variants mixing wheel size to different models. Call for customized pricing. I am also the only builder of unicycles that I know of that offers travel friendly breakdown split-able frames. The price of the frame does not include bearing holders, they are extra.

Freestyle 20” – I have the original built with a two-plate crown and over-sized tandem blades. My second generation is a wider two-plate design built with special custom blades. The second generation easily accommodates the wider 20” x 1.85 to 2.1 freestyle tires. First generation – 275.00 and up. Call for second generation pricing.

24”Racing – Mine are the fastest! Built with the 650 racing rim and tire that is exactly 24” in diameter. This is the perfect application for this wheel and it is FAST!! I can even use an Aero road crown and Aero fork blades – 275.00 for base unicrown style frame. These are built to take a 22.2mm seat post

700c – I can build these with a variety of fork crowns or unicrown style – 275.00 for unicrown frame.

36” Touring – A unicrown  fork crown which lowers the cost for a basic fork. Prices start at 275.00 for a unicrown frameset.

Multi-wheel – Stacked two or more wheels. This is actually a kit that can be added to any of my Freestyle uni frames or even a Miyata. The reduced kit consists of two double-bearing units, wheels (one or more) and two lower blades. These are tire size-specific units, not universal. Call or email for prices.

Mountain Unicycle – Basic versions are unicrown, but crowned versions can be made. Prices start at 275.00 for unicrown frame crowned versions and brake mounts extra.

Trials – Custom type fork contact me for pricing

29’er – A basic frame is unicrown, other custom can be done. Prices start at 275.00 for unicrown frame

Giraffe 4’ to 10’ – These can be equipped with splitters for packing into a suitcase. The approximate weight for a complete 10’ is 26.5 pounds. There is a variety of custom options available for my giraffes besides the base model. All my giraffes come with a stock removable seat tube. This allows for them to be shipped via UPS. Giraffes are priced and sold with drive train and wheel only. Seat, seat clamp, pedals, tire, and tube are not included. Seat clamp to fit a 1 1/4 tube is needed. My giraffes are equipped with a sealed-cartridge bottom bracket, aluminum alloy crank set with a replaceable aluminum alloy chain ring, aluminum alloy sealed-bearing track hub, and a nickel-plated 1/8” top-quality chain. A basic 10’ Giraffe is priced at 1350.00.

Eccentric for quick set up – 100.00.

Pull apart frame – 150.00 per split. The one shown below is a quick setup with four splits – total cost is 2050.00 for a complete unicycle as I sell them. Frame only, unfinished – 1600.00.

The touring extension is still available. Pictured below is the original one I designed for Andy Cotter and T.C.U.C after the first Unitour done across Minnesota. My extension mounts to the seat post, about a 1″ below plate. Mounting it to the seat post gives it superior adjustability up or down for optimum position. It also ensures a strong and rigid mounting point making it rock-solid for pulling and pushing. You can optionally mount any variety of mountain bar ends to the crosspiece for a two-handed hold, although this voids the protective ability of the bumper. A heavy aircraft cro-moly crosspiece acts as a bumper to prevent damage to the T-handle, ensuring longevity. A computer mount is also standard. The extension is made from U.S. made aircraft cro-moly which is different as night from day to the garden variety import Chinese/Taiwnese cro-moly due to its heat treatment and quality U.S. steel alloy.

ha

The Original extension developed shortly after the first Unicycle Tour across Minnesota. It features a front bumper, computer mount, and “T” handle for lifting body weight off saddle on long distance rides.

I will be adding a 100% stainless steel version of the rack and touring handle as soon as it passes testing.